Is it safe to mount a TV on drywall?

It is not safe to hang a TV on drywall alone. The mount should be lagged into wall studs, or, if the studs don’t line up with where you want the set, use a mount that spans the studs. Many older Central Florida homes have concrete-block walls that need masonry anchors, not drywall hardware, and if you’re not sure what’s behind the wall, have a pro do it.
Drywall is a finish surface. It is not a framing member. A mid-size TV is heavy enough, once you add the mount, to pull cheap anchors out of the board, and then you’ve got a smashed screen and a hole that is a lot harder to live with than the stand you were trying to get rid of. The safe version of this job puts the weight into something solid behind the drywall.
Start by finding the studs. A stud finder helps, and so does a small nail or a knock-and-listen check, because stud finders sometimes lie on textured walls or on walls with odd wiring. When you find the wood, mark the centers and lag the mount into those studs with the hardware that came with a mount rated for your TV’s weight. Don’t substitute drywall screws. They can snap.
Studs are often sixteen inches apart, and they are almost never centered on the exact spot you had in mind. If they don’t line up with the TV, don’t drag the set two feet to the left and live with a weird blank wall. Use a mount, or a backing plate, that spans the studs so the lags still go into wood and the screen still sits where you want it. Rated toggle anchors can play a supporting role on some mounts, but they are not a substitute for hitting structure on a heavy set. If the instructions for your mount say to use studs, believe them.
The other wrinkle around here is the wall itself. A lot of homes in Lake Nona, Winter Garden, and newer parts of Sanford are wood-frame with drywall, and the steps above apply. Plenty of older houses in College Park, downtown Orlando, and parts of Sanford and DeLand are concrete block, sometimes with furring and drywall over the block. If a stud finder gives you a confusing reading, or a bit hits something hard and solid right away, stop. That’s a masonry wall. It needs masonry anchors or fasteners into the block, not a drywall toggle you bought for a picture. Guessing on a block wall is how mounts end up loose.
A few rules are worth keeping in mind. Use a mount rated for the TV. Get the screen level, at a height you can actually watch, and with enough room for the set to vent. Plan the cords before you drill. Wrenchico will mount a TV into the studs, or into the right masonry hardware, get it level and solid, and tidy the cords with surface cord covers. We do not run wires inside the wall, add an outlet, or do any other electrical work. If you want the cords hidden in the wall, that part belongs to an electrician.
If you’re not sure what’s behind the wall, or you’d rather not guess with a television in your hands, book a $49 in-person consult through the job-request form on our Contact page. If you book the work from that visit within 30 days, the $49 is credited toward the project. We need at least 24 hours’ notice. For ongoing help with jobs like this, see our Home Care membership.
Book a $49 in-person consult
The $49 in-person consult is credited toward the quote from that visit only if you hire us for that work. The credit expires in 30 days. Every booking needs at least 24 hours' notice.
Office hours Monday–Friday, 8:00 a.m.–5:00 p.m..
